PRO CAN PUMP DUAL (PRO-CPD20)
Rev 1.6
2023/07/31
44/95
Copyright
©
2023 by TAEHA CORP. All Rights Reserved
CYLINDER
BLOWER
kPa
Displays the pressure of the cylinder and blower pressure regulator
on the inside front of the PRO-CPD20.
FEEDING
kPa
kPa
S.V
P.V
Displays the PRO-CPD20 feeding pressure.
➔
S.V(Set Value) : Setting feeding pressure value
➔
P.V(Present Value) : Present feeding pressure value
Each list displays an indication of operation.
➔
Cylinder : Cylinder up/down status display
➔
Blower : Blower on/off status display
➔
Vent : Vent valve on/off status display
➔
/
: Indication of vent liquid detection on/off
Indicates the time the equipment stays on after pail replacement.
Indicates liquid levels upon pail replacement.
➔
Prior to pail set-up, the remaining amount is expressed as
‘
???
’
.
Displays the set pail capacity value.
R
T
Displays communication status between the control board and the
LCD.
➔
T : Blinks when the LCD is sending a signal to the control
board.
➔
R : Blinks when the LCD is receiving a signal from the control
board
Displays the current time.
➔
Needs to be set at the beginning. (Set page -> ETC)
Turns the alarm sound of the signal tower buzzer on/off by
touching this icon.
12018.07.09 10:59
10:59
