PRO CAN PUMP DUAL (PRO-CPD20)
Rev 1.6
2023/07/31
31/95
Copyright
©
2023 by TAEHA CORP. All Rights Reserved
6
Operation method
6.1
Initial power input
If power is applied after connecting the PRO-CPD20 power connector, the display will show the home
screen after the intro screen display for 3 seconds as follows, and information will be activated on each
display window.
6.2
Pail set-up
You need to set up a new container to operate the equipment.
➔
When using the same container, it is not changed after the initial setting.
In order to join the initial material container, it is necessary to proceed without equipment alarms and
understand the concepts of cylinder position, blower high (= pail high) and pail low.
Pail set-up
-
Position(=Cylinder position)
-> Defined as follower plate position.
-
Blower High(=Pail high)
-> Defined as pail top end.
-
Pail low
-> Defined as pail bottom end.
