PRO CAN PUMP DUAL (PRO-CPD20)
Rev 1.6
2023/07/31
32/95
Copyright
©
2023 by TAEHA CORP. All Rights Reserved
Go to the setting mode as below, switch to manual mode, and touch the cylinder level operation icon
on the manual operation page to prepare the initial material container setting.
(The initial password when entering the SET PAGE is 0000.)
The initial container setting is not completed.
The position value shows the current position of the cylinder. The position value is 0 when it meets the
cylinder top sensor.
If the numerical value at the top and bottom of the container is 0, the initial container is not set.
