PRO CAN PUMP DUAL (PRO-CPD20)
Rev 1.6
2023/07/31
15/95
Copyright
©
2023 by TAEHA CORP. All Rights Reserved
The EMERGENCY is used for an emergency during the operation of
the equipment.
➔
Touch the Switch to stop all active elements.
➔
Not possible in test mode
The Change is used to raise the cylinder.
The operation is different depending on the setting mode of the
button
➔
Auto mode : The operation macro for rising is executed.
➔
Manual mode : Raise the cylinder
➔
Test mode : Test input page
–
Check the button input contact
point
Test output page
–
Check the button LED output
The INSERT button is to lower the cylinder.
The operation is different depending on the setting mode of the
button.
➔
Auto mode : The macro operation for lowering is executed.
➔
Manual mode : Lower the cylinder
➔
Test mode : Test input page
–
Check the button input
contact point
Test output page
–
Check the button LED output
This button is for operating material supply.
In order to use the supply start, the PAIL must be combined
(changed to PAIL ON) to operate, and the supply start condition is
required as below.
Auto mode : Supply can be started when the replacement complete
button is ON.
➔
Manual mode : The supply can be started when the
replacement button and INSERT button are ON
