PRO CAN PUMP DUAL (PRO-CPD20)
Rev 1.6
2023/07/31
39/95
Copyright
©
2023 by TAEHA CORP. All Rights Reserved
6.4.2
Auto mode
This is how to start supplying materials in auto mode.
Confirm that the vent sensor led is on and press the run button on the front panel to activate HMI
motor run on the home page along with the button led on. After a set period of time, the feeding PV
value will increase.
- If vent sensor led is off, the vent hose must be checked.
- If the material supply is operated, the signal tower turns on about 400ms.
