Page 44
CAUTION: Unplug the vacuum cleaner before servicing.
11. Press the foot pedal and lay the vacuum flat.
12. Reinstall the light board holder with two (2) screws (Fig. L.)
13. Position the belt around the direct air motor shaft and run it between the arms of the hall sensor
frame and down through the opening in the nozzle (Fig. M.)
14. Loop the belt around the agitator and roll it into place (Fig. N.)
Continued on next page
II. Maintenance and Repairs
Y. Reassemble from Motor Compartment (Continued)
Fig. L
Fig. M
Fig. N
