Page 29
CAUTION: Unplug the vacuum cleaner before servicing.
11. Route power cord under upper cord hook base as shown in Figure M.
12. Reinstall cord hook base (Fig. N.)
13. Connect the leads on the harness to the handle switch and power cord. See wiring diagram on page
70.
.
14. Position the left half of the handle grip under the handle tube. Position the harness board, the on/off
switch, and the carpet/floor button cover. Route the wiring carefully as shown in Fig. O.
15. Position the right half of the handle over the left and reinstall the six (6) screws (Fig. P.) Be careful
not to pinch any wires in the process.
II. Maintenance and Repairs
P. Replacing the Handle Harness (Continued)
Fig. M
Fig. N
Fig. O
Fig. P