Page 36
CAUTION: Unplug the vacuum cleaner before servicing
1. Remove the four screws securing the baseplate and remove the baseplate.
2. Remove the agitator.
3. Remove the four (4) screws securing the nozzle cover and remove the cover (Fig. A.)
4 Place the vacuum in the upright position and remove the two screws for the spring assist axle. (Fig B.)
5. Lay the machine flat. Remove the two (2) screws securing the light board holder (Fig. C.).
6. Move the light board to acess the inlet cover underneath (Fig. D.)
Continued on next page
II. Maintenance and Repairs
V. Separating the Nozzle from the Dust Compartment Body
Fig. A
Fig. B
Fig. C
Fig. D
