Page 34
CAUTION: Unplug the vacuum cleaner before servicing.
1. Follow steps 1-2 on the previous page.
2. Flip the machine over and remove the four (4) screws holding the baseplate (Fig A.) Remove base
plate.
3. Remove the height adjust axle (Fig. B.)
4. Use a screwdriver or other small tool to remove the capture ring from each wheel. Remove the
wheels.
5. Install new wheels as shown and secure with a capture ring. Use a 1/32 nut driver or similar tool to
press the ring into place.
Continued on next page
II. Maintenance and Repairs
T. Replacing the Height Adjust Wheels
Fig. A
Fig. B
Fig. C
Fig. D
