Page 41
CAUTION: Unplug the vacuum cleaner before servicing.
1. Make sure all the wires are routed properly as shown in Fig. A.
2. Take care not to pinch any wires when positioning the motor cover. Install the five (5) screws to
secure the motor cover.
3. Install the left and right pivot bushings. Line up the notch and tab as shown in Fig. C. Make sure the
left hand pivot is installed as shown in Fig. D.
Continued on next page
II. Maintenance and Repairs
Y. Reassemble from Motor Compartment
Fig. A
Fig. B
Fig. C
Fig. D