SVP HDR-106, Manual

Page: 87 / 213

86
HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
4
Alarm Beep:
If this option is enabled then a beep noise will sound each time that
an alarm occurs. (eligible parameter)
The available options are:

Enable

Disable
5
Clock:
In this field the date and the current hour are displayed and they
can also be configured pressing the OK button and changing the
values with Up, Down and Right, Left buttons. (reading and editable
parameter)
6
Location Labels:
In this field there can be configured several parameters such as the
place in which the device is located as well as the position of the
transmitter and the receiver device. (editable parameter)
7
VoIP MAC:
In this field the MAC address of the Video over IP card is displayed
(reading parameter)
8
Network MAC:
In this field the MAC address of the network is shown. (reading
parameter)
9
QuickSet Protocol:
In this field the type of QuickSet Protocol employed is shown
(eligible parameter). The available options are: PTCR-20 and PTCR-
96.
10
Distance Units:
If miles is selected, then, all the distances will be in miles and the
same occurs if kilometers is selected. (elegible parameter)
The available options are:

Kilometers

Miles