SVP HDR-106, Manual

Page: 41 / 213

40
HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
Line nº Function
1
DVB-T

Rx Frequency:
In this field, the frequency of the received signal must be set. So as
to establish the frequency value first, press the OK button and then,
with the Up, Down arrows buttons select the desired value. So as to
save the introduced value, press the OK button. (editable
parameter)
2
DVB-T

Bandwidth:
In this option, the bandwidth of the received signal must be
specified. So as to select the bandwidth value, Right, Left buttons
must be pressed. (eligible parameter)
The available options are:

5 MHz

6 MHz

7 MHz

8 MHz
3
DVB-T

LO Frequency:
In this field, the frequency of the local oscillator of the Down-
Converter connected to the I.F. input must be specified. So as to
establish the frequency value first, press the OK button and then,
with the Up, Down arrows buttons select the desired value. So as to
save the introduced value, press the OK button. (editable
parameter)
4
DVB-T

Tuner:
This option allows enabling or disabling each of the IF inputs of the
device. When the enable option is selected in an IF input, this input
supplies power to the down converter connected to it. So as to
choose the IF input, press the Right, Left buttons. So as to enable or
disable the selected input, press the OK button. (eligible parameter)
The available options are:

Tuner 1 (Enable, Disable)

Tuner 2 (Enable, Disable)

Tuner 3 (Enable, Disable)

Tuner 4 (Enable, Disable)

Tuner 5 (Enable, Disable)

Tuner 6 (Enable, Disable)