SVP HDR-106, Manual

Page: 56 / 213

55
HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
3
InpIP

Fec:
To select if FEC is enabled or disabled in the received signal press
Right, Left buttons. (eligible parameter)
The available options are:

Enable Col: Row: (The IP Forward Error Correction is
composed by a number of FEC columns and rows. In this field it
is shown the number of FEC columns and rows of the received
signal) (reading parameter)

Disable
4
InpIP

Port:
This field must be filled in with the port number through which is
going to receive the signal. So as to edit this parameter, press the
OK button and then, select the desired port with the Up, Down, or
Right, Left buttons. So as to save the introduced value, press the OK
button. (editable parameter)
5
InpIP

Output Delay [1..9942]ms:
Delay from IP input to ASI output which is the delay between the
obtaining of the IP input and the delivery to the decoder and to the
ASI output. So as to edit this parameter, press the OK button and
then, select the desired port with the Up, Down and Right, Left
buttons. So as to save the introduced value press the OK button.
(editable parameter)
6
InpIP

TP per IP:
This field displays the number of TS packets per IP packet. (reading
parameter)
7
InpIP

Status:
This field displays the status of the IP input. (reading parameter)
8
InpIP

Protocol:
This field displays the protocol used for the communication. (reading
parameter)
The possible options are:

UDP

RTP