SVP HDR-106, Manual

Page: 161 / 213

160
HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
Pin Description
D Sector 1
E Sector 2
F Sector 3
G Sector 4
H Sector 5
J Sector 6
Table 8.24 Autotracking connector pinout ( for an AMS multisectorial switch
antenna)
8.2.10 Remote control
The HDR-106 receiver can be controlled and monitored remotely over an
Ethernet link throughout a Web Server and SNMP.
The link is connected via an 8-pin RJ-45 connector with a 10 Base-T
network interface. This connector is located on the rear panel of the rack-
mount demodulator.
Remote connection technical features
Item Features
Connector Label REMOTE
Connector type RJ-45
Table 8.25 Remote connection technical features
8.2.11 USB
Through the USB connection, it is possible to update directly from an
external USB device the firmware of the HDR-106 receiver. The connector is
type A and its pinout is:
USB connection technical features
Item Features
Connector Label USB
Connector type Type A
Table 8.26 USB input connection technical features