198
HDR-106
MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
Figure E.6 Open Network Stream
Step 5
Then, go to Network section and enter the network URL as it is shown in the
figure below.
The network URL has different parts:
udp://@:5678
Protocol:
The type of protocol selected for the communication. It can
be RTP or UDP.
Port:
Number of port of the device.
Figure E.7 Network URL
Step 6
Finally, press Play and the desired IP video will appear on the screen.
In the figure below, a connection diagram is shown. The aim of this diagram
is to explain users how to connect the HDR-106 receiver and configure its
parameters if it is wanted to use the VLC media player and the Webserver
at the same time. The meaning of the parameters is:
Local IP:
IP address of the device for the Video over IP connection.
Webserver IP:
IP address of the device for the Webserver
connection.
Destination IP:
IP address of the device to which data is sent.
Destination Port:
Number of port of the device to which data is
sent.
Protocol
Port
Summary of Contents for HDR-106
Page 208: ...207 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 209: ...208 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 210: ...209 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 211: ...210 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0 Notes...