SVP HDR-106, Manual

Page: 114 / 213

113
HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
- [Tw] Level:
In this field, the level of the received signal, where w is the number
of the demodulator (from 1 to 6 for diversity mode), is shown in
dBm. (reading parameter)
- [Tw] SNR:
In this field, the Signal to Noise Ratio value of the received signal,
where w is the number of the demodulator (from 1 to 6 for diversity
mode), is displayed in dB. (reading parameter)
- [Tw] MER:
In this field, the Modulation Error value of the received signal, where
w is the number of the demodulator (from 1 to 6 for diversity mode),
is displayed in dB. (reading parameter)
- Down-Converter:
Enabling the down converter option (6 available) means that the
receiver device supplies power to the down converter device. If
disable option is chosen then, no power is supplied to the down
converter. (eligible parameter)
- IF Cable Type:
In this field, if a cable is used from the receiver device to the down
converter device (6 available) the type of the cable must be specified.
If no cable is being used then, select the not used option. The
possible types of cables are RG-142, RG-58, RG-214, LMR-400,
CEFLEX 1/2, LDF450A 1/2, BELDEN H125 and BELDEN PRG11.
(eligible parameter)
- IF Cable Length:
In this field, if a cable is used from the receiver device to the down
converter device it must be specified the length of the cable. If no
cable is being used, then, select the not used option. (editable
parameter)
When editable parameters are being set in the Web Server and new
values are being introduced, the text remains in red colour until the
enter button is pressed. When the enter button is pressed, the new
values are saved and the text will appear in black colour. It is
necessary to press the enter button to keep and save the new values
on the screen.