SVP HDR-106, Manual, Page: 49 / 213

48
HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
Line nº Function
1
DVB-S2/S

Input:
In this field, the desired LNB input must be set. So as to choose the
LNB needed, press Right and Left buttons and select an option.
(elegible parameter)
The available options are:

LNB1

LNB2

LNB3

LNB4
2
DVB-S2/S

Satellite Frequency:
In this field, the frequency of the satellite must be specified. So as
to establish the frequency value first, press the OK button and then,
with the Up, Down arrows buttons select the desired value. So as to
save the introduced value, press the OK button. (editable
parameter)
3
DVB-S2/S

LNB:
This option allows enabling or disabling each of the LNB inputs. So
as to configure the LNB input, press the OK button and then choose
any of the available options:

LO Frequency (editable parameter)

Voltage (elegible parameter)

22 KHz Tone (Enable, Disable)
4
DVB-S2/S

Locked:
This option shows if the signal is being received or not. If the signal
is not received, NO message will appear in the screen.
5
DVB-S2/S

Signal Quality:
In this option, the quality of the received signal is specified. So as to
read the information related to it, press the OK button and analyze
the different options.
The available options are:

RF level (reading parameter)

SNR (reading parameter)

MER (reading parameter)

Es/No (reading parameter)

Eb/No (reading parameter)

Link Margin (reading parameter)