SVP HDR-106, Manual

Page: 55 / 213

54
HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
Line nº Function
1
InpIP

Local IP Config:
So as to configure the network parameters, press the OK button.
(editable parameters)
The available options are:

Local:
So as to establish the Local IP address, press the OK button and
then, with the UP, Down buttons change the value. If the user
wants to change from one character to another, press the Right,
Left buttons. So as to save the introduced value, press the OK
button. If this IP is the same as the IP for remote control
(Webserver / SNMP), the device will show a warning message.

Mask:
In this field the Subnet Mask address must be specified. So as to
establish the Subnet Mask address, press the OK button and
then, with the UP, Down buttons change the number value. If
the user wants to change from one character to another, press
the Right, Left buttons. So as to save the introduced value, press
the OK button.

Gateway:
In this field the Gateway address must be specified. So as to
establish the Gateway address, press the OK button and then,
with the UP, Down buttons change the value. If the user wants
to change from one character to another, press the Right, Left
buttons. So as to save the introduced value, press the OK
button.
2
InpIP

Adr:
So as to select the short of address from which IP information is
received, press Right, Left buttons. (eligible parameters)
The available options are:

Unicast:
In case it is wanted to receive the signal from any single IP
address to this device, unicast option must be chosen.

Multicast:
In case the signal is received from a multicast address, that
multicast address must be configured in this field. So as to enter
the multicast address, press OK button so as to be able to
configure the multicast address. (editable parameter)