SVP HDR-106 Manual Download

Page: 185 / 213

184

HDR-106

MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver

MANUAL 7.0

D.2 AM-406L Multisector Antenna

D.2.1 Introduction

The AM-406L is a multisector antenna, which has been developed by SVP

Broadcast Microwave. This is a very compact, robust and easy to install

solution for applications where hemispherical coverage with high gain is
needed.

The AM-406L antenna is formed of 5 vertical linear polarization sector panel

antennas to offer an omnidirectional coverage. It also has an up antenna

which allows hemispherical coverage.

This antenna integrates the bandpass filters and the down-converters. At
the N connector outputs it offers the received signal filtered, amplified and

converted to the UHF band.

The AM-406L antenna has been designed to be used in the receiver site in

airborne links in diversity 6 mode; the up-down antenna allows the
reception of the signal coming from the helicopter even if it is in the vertical

direction.

Figure D.4 AM-406L antenna

Summary of Contents for HDR-106






















































































































































































































Search results

Summary of Contents for HDR-106

Reviews:

Related manuals for HDR-106

Brands by name

Popular brands

SVP HDR-106, Manual

Search results

Summary of Contents for HDR-106

Reviews:

Related manuals for HDR-106

Brands by name

Popular brands