SVP HDR-106, Manual

Page: 72 / 213

71
HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
When the Auto option is selected, it means that the sector antenna
is automatically selected. The selected sector is the one which is
marked with the square brackets.
If the OK button is selected in this option, the parameters related to
the transmitter GPS information (TX Distance and TX Position) and
the local GPS information (Local Manual and Local Altitude) are
shown.
II. Manual
Figure 3.58 Sector Autotracking (Manual)
If the Manual option is selected then, by pressing the OK button the
user can select manually the sector antenna from which it is wanted
to receive the signal.
III. Config
Pressing the OK button when the Config option is selected, the user
is allowed to configure the number of the sectorial antennas, the
degrees of the sectors and if a top antenna is included.
Figure 3.59 Sector Autotracking (Config)
Using the Up, Down keys the user can change the value of each
parameter and with the Right, Left buttons the user can select the
value to be modified. So as to save the values, the OK button must
be pressed.
Omni antenna
In this option, the autotracking is configured with an omnidirectional
antenna and the different parameters related to it.
Figure 3.60 Omni Antenna option
1 2 3 [4] 5 T Config <
Nr. antennas: 6 Deg: 75º UP:Yes Rem.GPS:AUTO
1 2 3 [4] 5 T Δd:---.-km Man <>
L [ ]:-- C/N [ ]:-
DVB-T

Autotracking: Omni <
CA BISS: BISS-1 >