SVP HDR-106, Manual

Page: 149 / 213

148
HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
8.2.2 Intermediate frequency
Intermediate frequency inputs I.F.1 … I.F.6
The connection between the receiver unit and the down-converter uses a
coaxial cable, whose maximum length depends on the type of coaxial cable
used. If the “Celflex ½” coaxial cable is used, the maximum length is 130m
but if the RG-214 coaxial cable is used, the maximum length is reduced to
80m.
The IF inputs of the demodulator supply DC power to the down-converters.
Intermediate frequency connection technical features
Item Features
Connector label I.F.1…I.F.6
Connector type N female
Impedance 50Ω
Input range: 0 to-95 dBm
Table 8.5 IF input features (DVB-T2/T)
Intermediate frequency inputs for DVB S2/S (optional)
The information of the connectors needed for the IF stage in DVB-S2/S is
shown below.
Intermediate frequency connection technical features
Item Features
Connector label LNB 1 … LNB 4
Connector type Type F
Frequency L Band
Impedance 75Ω
Table 8.6 IF input features (DVB-S2/S)