SVP HDR-106, Manual, Page: 129 / 213

128
HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
6.2.8 TSoverIP Output
Figure 6.14 Web Server TSoverIP Output screen
IP Output (This option is available if the IP Input is not
selected)
- Destination address:
In this option, the IP address of the device to which data is sent must
be configured. In case it is wanted to send data to a multicast
address just enter the desired multicast address. (editable
parameter)
- UDP Port:
In this option, the port number of the device to which data is sent
must be configured. (editable parameter)
- FEC:
In this field the Forward Error Correction can be enabled or disabled.
In case it is enabled, the number of columns and rows can be
configured. If FEC option is enabled then, the only protocol which can
be used is RTP. (eligible parameter)
- TP per IP:
In this field the number of Transport Stream packets per IP (from 1
to 7) can be configured. (editable parameter)