SVP HDR-106, Manual

Page: 132 / 213

131
HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
Figure 6.16 Web Server Unit screen
First of all, the status of the different LEDs available is presented. These
LEDs provide specific information about the status of the receiver:

ON/OFF:
The Led lights up in green when the equipment is turned on and it
turns up in red if the equipment is turned off.

ALARM:
The Led lights up in red when any alarm occurs.

REMOTE:
The Led lights up in green when the user is connected remotely to the
device.

STATUS:
The Led lights up when a change in the configuration of the device is
being processed.
Configuration
- Standby Mode:
In this option HDR-106 receiver will be in standby or in ON mode.
- Timeout Reset:
In this field the time that the receiver could be without receiving any
signal is selected. After passing this time, the equipment is reset. To
disable this option, 0 value must be written. (editable parameter)
- Webserver IP:
In this field, the IP address for the Webserver connection can be
configured (editable parameter). This IP is the IP that has to be set in
the web browser to access to the Webserver and it must be different
from the TSoIP Local IP and the Destin IP.