HDR-106
MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
3.2
Reception Examples
Next, some reception examples and the image that appears in the monitor
screen are shown.
Example 1 (DVB-T)
Setup:
Received signal standard: DVB-T
Bitrate: 8.7 Mbps
Video codification: MPEG-2
Input video signal format: 576i
Profile: 4:2:2
Delay: Low delay
Audio status: Audio1 enabled, Audio2 disabled
Data status: GPS
Reception frequency: 2.000,00 MHz
Modulation scheme: QPSK
FEC: 3/4
Guard Interval: 1/16
Bandwidth: 8 MHz
Number of cuts occurred to the input FI signal: 0
Figure 3.8 HDR-106 Monitor screen. Example 1
The audio 2 status indicator is darkened because it is only receiving one
audio signal. If two audio signals are received, then this field will not be
darkened.
The data status field indicates with a darkened character that no data is
being received. If the ‘G’ character appears and it is not blinking, it means
that the GPS in the transmitter is connected to the satellites.
If before the audio status a padlock appears, it means that the received
signal is encrypted.
DVBT: 8.7Mb MPEG2 576/50i 422/L A
A
G
F:2.000,00MHz QPSK 3/4 1/16 8MHz 0
darkened
not blinking
padlock
Summary of Contents for HDR-106
Page 208: ...207 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 209: ...208 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 210: ...209 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 211: ...210 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0 Notes...