![background image](http://html1.mh-extra.com/html/animo/kamai-7b/kamai-7b_user-manual_2943915001.webp)
4
3
2
1
7 8 9
6
5
Power/Activity LED:
Blue = on.
Blue flashing = infra-red (IR) command received.
Red = standby.
Warning!
Before connecting or disconnecting the
Kamai 7B to your TV using any kind of cable, first
switch off the Kamai 7B, the TV and all other devices
connected to it (A/V amplifiers etc.) and disconnect
them from the mains electrical supply.
You have a choice of ways to connect the audio and
video produced by the Kamai 7B to your TV:
1. HDMI:
Recommended for best quality. Connect a
HDMI cable from the HDMI output of the Kamai 7B to
the HDMI input of your TV.
2. Analog A/V:
Provides good quality in SD only.
Composite video with analog audio left/right.
Connect the 3.5mm jack to the analogue A/V output
on the Kamai 7B. Connect the yellow RCA plug to the
yellow video port on your TV. Connect the red and
white RCA plugs to the red and white audio ports on
your TV.
Connecting your television directly to the audio/video
output of your Set Top Box will assure a more vivid
picture and enhance your viewing enjoyment.
Connecting to a Wi-Fi
The Kamai 7B may be supplied with internal, single
band Wi-Fi . Please contact your service provider for
detailed instructions on configuring your wireless
network.
1. Analogue A/V output.
2. Ethernet port.
3. HDMI output.
4. USB port.
5. Reset button. Only for use under guidance from
your service provider.
6. S/PDIF optical output.
7. DC power in 12 V 2 A.
8. On/off switch.
9. WPS button.
Contents
Your Kamai 7B is supplied with the correct power
adapter for your region. Depending on the choices
made by your service provider, your box may also
contain the optional accessories shown below.
The Kamai 7B is protected with a clear plastic film.
This should be removed before use.
Optional accessories
Overview of the Kamai 7B
1. Connecting the Kamai 7B to a TV
Kamai 7B User Guide
Connect one end of an optical S/PDIF cable to the S/
PDIF optical output of the Kamai 7B. Connect the other
end to the S/PDIF optical input of your A/V amplifier or
home cinema system.
3. Connecting the Kamai 7B to power supply
Warning! The Kamai 7B must only be used with the
power adapter provided with the product. Ensure you
have the right power adapter for your region. If you are
unsure, contact your service provider.
Connect the power adapter to the DC power input of
the Kamai 7B, then insert the power adapter plug into
the mains supply.
2. Connecting the Kamai 7B to an A/V
amplifier
Remote control and batteries
HDMI cable
Ethernet cable
3.5 mm jack to
3 x RCA cable