3
2
1
4
USING UNITUNE CLIP
1
Power On/Off: UniTune Clip auto-
matically turns off after 3 minutes.
2
Reference Tone: Press the “Refer-
ence Tone” button to set the reference
pitch. To increase the reference pitch in
1 Hz steps, press the “Reference Tone”
button. 2 To decrease the reference
pitch in 1 Hz steps, press the “Display”
button. 3
For tuning your instrument, just pluck
the individual strings and UniTune Clip
displays the note you are close to.
Depending on various factors such as
age-related changes or the surface finish,
there is a possibility that your instrument’s
coating may be damaged by attaching
this product. In general, do not leave ac-
cessories such as UniTune Clip attached
to your guitar longer than necessary, as
the rubber pad may adversely affect
the finish of your instrument, especially
when it is exposed to sunlight for extended
periods of time.
3
Display: Toggle between Needle and
Strobe tuning modes.
4
Orientation: UniTune Clip’s display
automatically flips. If you use the tuner
either at the front or back of the head-
stock, or even if you’re left-handed, the
display will always be correctly aligned.
The lit arrow shows the current direction.
