Suzuki Engine 2002 GRAND VITARA SQ625, Service Manual

Page: 515 / 834

6A4-26 ENGINE MECHANICAL (J20 ENGINE)
16) Remove crankshaft pulley (1).
If it is hard to remove, use special tools (Steering wheel
remover and Bearing puller attachment) as shown in figure.
If bolts of steering wheel remover are too long, replace them
with those of suitable length.
Special tool
(A) : 09944-36011
(B) : 09926-58010
17) Remove timing chain cover.
CLEAN
• Clean sealing surface on timing chain cover, crankcase, cyl-
inder block and cylinder head.
• Remove oil, old sealant and dust from sealing surface.
INSPECTION
Check oil seal lip for fault or other damage.
Replace as necessary.
INSTALLATION
Reverse removal sequence to install timing chain cover noting the
following points.
1) Using special tool (bearing installer), install new oil seal its
surface is flash with edge of timing chain cover.
Special tool
(A) : 09913-75510