Suzuki Engine 2002 GRAND VITARA SQ625, Service Manual

Page: 49 / 834

6-44 ENGINE GENERAL INFORMATION AND DIAGNOSIS (G16/J20 ENGINES)
E61
13
PPL/GRN
(Canvas
Top model) Serial communication line
of data link connector 12 V
(if equipped) 10 – 14 V Ignition switch turned ON PPL/RED
(other than
Canvas
Top model)
14 WHT/RED
Test switch terminal (if
equipped)
10 – 14 V Ignition switch turned ON
15 BLK/RED
Electric load signal for rear
defogger switch (if
equipped)
0 – 1 V
Ignition switch turned ON, rear
defogger switch OFF
10 – 14 V
Ignition switch turned ON, rear
defogger switch ON
16 PNK/WHT
Electric load signal for
heater blower motor
10 – 14 V
Ignition switch turned ON, Blower
fan selector selected at under 3rd
speed position
0 – 1 V
Ignition switch turned ON, Blower
fan selector selected at 3rd speed
position or more
17 YEL/BLK
A/C request signal (if
equipped)
10 – 14 V
(High input)
Ignition switch turned ON, Blower
fan selector selected OFF position
or A/C switch turned OFF or A/C
evaporator temp. less than 2.5°C,
36.5°F
0 – 1 V
(Low input)
Ignition switch turned ON, Blower
fan selector selected ON position
and A/C switch turned ON with A/C
evaporator temp. more than 4°C,
39.2°F
18 – – – –
19 ORN/BLK
“4WD” lamp output (if
equipped)
0 – 1 V
Ignition switch turned ON, Transfer
selector selected at “4H” or “4L”
range
10 – 14 V
Ignition switch turned ON, Transfer
selector selected at “2H” range
20 WHT/BLK
“OD OFF” lamp output (A/T
vehicle)
0 – 1 V
Ignition switch turned ON, “OD
OFF” selector switch selected at OD
OFF
10 – 14 V
Ignition switch turned ON, “OD
OFF” selector switch selected at OD
ON
21 GRY/BLU
“POWER” lamp output (A/T
vehicle)
0 – 1 V
Ignition switch turned ON, Selector
switch selected at Power mode
10 – 14 V
Ignition switch turned ON, Selector
switch selected at Normal mode
TERMINAL
WIRE
COLOR
CIRCUIT
NORMAL
VOLTAGE
CONDITION