Suzuki Engine 2002 GRAND VITARA SQ625, Service Manual

Page: 505 / 834

6A4-16 ENGINE MECHANICAL (J20 ENGINE)
5) Install cylinder head cover to cylinder head. Tighten nuts (3)
in such order as indicated in figure a little at a time till they
are tightened to specified torque.
• Use new seal washers (1).
Tightening torque
Cylinder head cover nut (a) : 11 N·m (1.1 kg-m, 8.0 lb-ft)
6) Install ignition coils and connect ignition coil couplers.
7) Install oil level gauge (2).
8) Connect breather hose and PCV hose to cylinder head
cover.
9) Connect accelerator cable to clamp (For LH steering vehicle
only).
Oil Pan and Oil Pump Strainer
COMPONENTS
1
2
3, (a)
a b
d e
c f
1. Oil pan
: Apply sealant 99000-31250 to mating surface of oil pan
and lower crankcase referring to Step 2) of “Installation”.
5. Drain plug 9. Oil pump strainer bracket bolt
2. Strainer 6. Oil pan nut Tightening torque
3. O-ring 7. Oil pan bolt Do not reuse.
4. Gasket 8. Oil pump strainer bolt