Suzuki Engine 2002 GRAND VITARA SQ625, Service Manual

Page: 586 / 834

ENGINE MECHANICAL (J20 ENGINE) 6A4-97
8) Install flywheel (M/T vehicle) or drive plate (A/T vehicle).
Using special tool, lock flywheel or drive plate, and tighten
flywheel or drive plate bolts (1) applied with sealant to speci-
fication.
“A” : Sealant 99000-31110
Special tool
(A) : 09924-17811
Tightening torque
Fly wheel or drive plate bolt
(c) : 70 N·m (7.0 kg-m, 51.0 lb-ft)
9) Install engine side mounting brackets (1) (right and left).
Tighten bracket bolts to specified torque.
Tightening torque
Engine side mounting bracket bolt
(d) : 55 N·m (5.5 kg-m, 40.0 lb-ft)
10) Install water pump (2) and heater outlet pipe (3) referring to
“Water pump” and “Cooling Water Pipes or Hoses” in Sec-
tion 6B.
11) Install pistons and connecting rods referring to “Pistons, Pis-
ton Rings, Connecting Rods and Cylinders” in this section.
12) Install oil pump referring to “Oil pump” in this section.
13) Install cylinder head assembly to cylinder block referring to
“Valves and Cylinder Head” in this section.
14) Install timing chains, timing chain tensioner, timing chain
guide, timing chain sprockets, timing chain cover, crankshaft
pulley, water pump pulley, etc... Refer to “1st Timing Chain
and Chain Tensioner” in this section.
15) Install oil pump strainer and oil pan.
16) Install clutch to flywheel (for M/T vehicle). For clutch installa-
tion, refer to “Clutch Cover, Clutch Disc and Flywheel” in
Section 7C1.
17) Install engine assembly to vehicle referring to “Engine
Assembly” in this section.