Suzuki Engine 2002 GRAND VITARA SQ625, Service Manual

Page: 419 / 834

6A2-44 ENGINE MECHANICAL (H25 ENGINE)
INSTALLATION
1) Check timing mark on crankshaft as shown in figure.
2) Install 1st timing chain crankshaft sprocket (2) to crankshaft
(1) as shown in figure.
Confirm that tooth for CKP sensor are free from metal parti-
cles and damage.
3) Check timing mark on RH bank intake camshaft as shown in
figure.
4) Install RH bank 1st timing chain intake camshaft sprocket (1)
noting the following points.
• The sprocket should be set in such way that its RH mark (4)
can be seen.
• Camshaft (2) should be held stationary by using a spanner
at its hexagonal parts (3) as shown in figure.
Tightening torque
Camshaft timing sprocket bolt
(a) : 80 N·m (8.0 kg-m, 58.0 lb-ft)
1. Crank timing pulley key
2. Oil jet
3. Lower crankcase
1. Knock pin of intake camshaft
2. Match mark
5. Bolt