Suzuki Engine 2002 GRAND VITARA SQ625, Service Manual

Page: 403 / 834

6A2-28 ENGINE MECHANICAL (H25 ENGINE)
INSTALLATION
Reverse removal sequence to install timing chain cover noting the
following points.
• Using special tool (bearing installer), install new oil seal, its
surface is flash with edge of timing chain cover.
Special tool
(D) : 09913-75510
• Apply sealant “A” (2) to timing chain cover (1) sealing surface
area as shown in figure.
“A” : Sealant 99000-31250
Sealant amount
“f” : 3 mm (0.12 in.)
“g” : 2 mm (0.08 in.)
• Apply sealant “B” to mating surfaces of cylinder head (3) and
cylinder block (4) as shown.
“B” : Sealant 99000-31140
Sealant amount
“a” : 7 mm (0.28 in.)
“b” : 67 mm (2.64 in.)
“c” : 17 mm (0.67 in.)
“d” : 18 mm (0.71 in.)
“e” : 10 mm (0.39 in.)
• Apply engine oil to oil seal lip and water pump O-ring, then
install timing chain cover.
Tightening torque
Timing chain cover bolt
: 11 N·m (1.1 kg-m, 8.0 lb-ft)
5. Cylinder head gasket
6. Rub into
7. Jig
[A] : View A