Sun Microsystems Netra 210, Service Manual

Page: 8 / 122

viii Netra 210 Server Service Manual • March 2006
FIGURE 3-1
Pressing Down the Ejector Levers 3–2
FIGURE 3-2
Lifting the Memory Out of the Socket 3–3
FIGURE 3-3
Memory Pairs 3–4
FIGURE 3-4
Positioning the Memory Over the Slot 3–4
FIGURE 3-5
Pressing Memory Into the Slot 3–5
FIGURE 3-6
Loosening the PCI Card Thumbscrew 3–6
FIGURE 3-7
Sliding the PCI Card Retainer Forward 3–6
FIGURE 3-8
Removing the PCI Card From the Slot 3–7
FIGURE 3-9
Loosening the PCI Card Thumbscrew 3–8
FIGURE 3-10
Sliding the PCI Card Retainer Forward 3–8
FIGURE 3-11
Installing the PCI Card Into the Slot 3–9
FIGURE 3-12
Securing the PCI Card 3–9
FIGURE 3-13
Sliding the PCI Card Retainer Back 3–10
FIGURE 3-14
Disconnecting the SAS Cables 3–11
FIGURE 3-15
Lifting the SAS Cables Out of the Clamps 3–11
FIGURE 3-16
Disconnecting Cables From the SAS IF Assembly 3–12
FIGURE 3-17
Removing the SAS Board Screw 3–12
FIGURE 3-18
Removing the SAS Board 3–13
FIGURE 3-19
Installing the SAS Board 3–14
FIGURE 3-20
Installing the SAS Board Screw 3–14
FIGURE 3-21
Connecting Cables to the SAS IF Assembly 3–15
FIGURE 3-22
Pressing the SAS Cables In to the Clamps 3–15
FIGURE 3-23
Connecting the SAS Cables 3–16
FIGURE 3-24
Releasing the Battery 3–17
FIGURE 3-25
Installing the Battery 3–18
FIGURE 3-26
Removing the SCSI and Serial Port Screws 3–20
FIGURE 3-27
Removing the System Board Screws and Standoffs 3–21
FIGURE 3-28
Removing the System Board 3–22
FIGURE 3-29
Location of the CPU Heat Sink Assemblies 3–23
FIGURE 3-30
Detaching the Fan Power Cables 3–23