Sun Microsystems Netra 210, Service Manual

Page: 111 / 122

Appendix B Signal Pinouts B-3
FIGURE B-2
Network Management Port Pin Numbering
B.3 Serial Ports
The server has two serial ports, labeled SERIAL MGT and l0l0l .
TABLE B-4
lists the
default serial connection settings for both serial ports.
B.3.1 Serial Management Port
The serial management connector (labeled SERIAL MGT) is an RJ-45 connector that
can be accessed from the rear panel. This port is the default connection to the server.
Use this port
only for server management.
TABLE B-3
Network Management Connector Signals
Pin Signal Description Pin Signal Description
1 Transmit Data + 5 Common Mode Termination
2 Transmit Data – 6 Receive Data –
3 Receive Data + 7 Common Mode Termination
4 Common Mode Termination 8 Common Mode Termination
TABLE B-4
Default Serial Connection Settings
Parameter Setting
Connector SERIAL MGT or
l0l0l
Rate 9600 baud
Parity None
Stop bits 1
Data bits 8
1 8