Sun Microsystems Netra 210, Service Manual

Page: 102 / 122

5-6 Netra 210 Server Service Manual • March 2006
■
Alarm cables
■
Power cables
7. Power on the server.
See Section 5.4, “Powering On the Server” on page 5-6 .
5.4 Powering On the Server
After servicing the server, power it back on.
1. Ensure that the server is properly installed back into the rack.
See Section 5.3, “Installing the Server Into the Rack” on page 5-4 .
2. Open the bezel.
See Section 1.5, “Opening the Bezel” on page 1-5 .
3. Press and release the power button.
See
FIGURE 5-8
.
FIGURE 5-8
Powering On the Server
4. Close the bezel.
See Section 5.2, “Closing the Bezel” on page 5-3 .
5. If components were installed, verify their installation.
See Section 5.5, “Verifying the Installation” on page 5-7 .
O
N/
STANDBY
O
N/
STANDBY