Sun Microsystems Netra 210, Service Manual

Page: 39 / 122

Chapter 2 Storage Components 2-11
FIGURE 2-9
Removing the SCC
Caution – Do not power on the server without the SCC installed.
5. Determine your next steps:
■
If you were directed here by another procedure, return to that procedure.
■
Otherwise, install the SCC.
Go to Step 3 of Section 2.4.2, “Installing the SCC” on page 2-11 .
2.4.2 Installing the SCC
1. Open the bezel.
See Section 1.5, “Opening the Bezel” on page 1-5 .
2. Locate where the SCC installs.
The SCC installs at the left side of the front panel.
3. Remove the replacement SCC from its shipping container and antistatic
packaging.
4. Slide the SCC into the slot, gold pads down.
See
FIGURE 2-10
.