Sun Microsystems Netra 210, Service Manual

Page: 54 / 122

3-14 Netra 210 Server Service Manual • March 2006
6. Press the left edge of the SAS board down onto the plastic standoff.
See
FIGURE 3-19
.
FIGURE 3-19
Installing the SAS Board
7. Carefully lower the right edge of the SAS board down onto the system board
connectors and press firmly.
See
FIGURE 3-19
.
8. Using a No. 2 Phillips screwdriver, install the screw at the left rear of the SAS
board to secure it in place.
See
FIGURE 3-20
.
FIGURE 3-20
Installing the SAS Board Screw
9. Remove the two SAS cables from the shipping container and connect them to the
SAS IF assembly at
J7
.
See
FIGURE 3-21
.