Sun Microsystems Netra 210, Service Manual

Page: 89 / 122

Chapter 4 Chassis Components 4-17
FIGURE 4-21
Connecting the Cables to the DVD Assembly
8. Install the rotary switch cap by aligning it with the flat spot of the shaft and then
pressing it straight on.
See
FIGURE 4-22
.
FIGURE 4-22
Installing the Rotary Switch Cap
9. Install the SCC.
See Section 2.4.2, “Installing the SCC” on page 2-11 .
10. Install the DVD module.
See Section 2.3.2, “Installing the DVD Module” on page 2-8 .
11. Determine your next steps:
■
If you were directed here by another procedure, return to that procedure.
■
Otherwise, install the air duct and top cover, close the bezel, install the server into
the rack, power on the server, and verify the installation.
■
See Section 5.1, “Installing the Top Cover” on page 5-1 .
■
See Section 5.2, “Closing the Bezel” on page 5-3
■
See Section 5.3, “Installing the Server Into the Rack” on page 5-4 .
■
See Section 5.4, “Powering On the Server” on page 5-6 .