Sun Microsystems Netra 210, Service Manual

Page: 100 / 122

5-4 Netra 210 Server Service Manual • March 2006
3. Gently lift the grips up and push them toward the chassis at the same time.
See
FIGURE 5-5
.
FIGURE 5-5
Closing the Bezel
The bezel folds upward.
Note – If the bezel catches while folding, stop. Gently lower the side of the bezel
that is higher to be parallel with the opposite side. Then try to fold the bezel again.
4. Determine your next steps:
■
If the server is powered off, power it on. See Section 5.4, “Powering On the
Server” on page 5-6 .
■
Otherwise, return to that procedure that directed you here.
5.3 Installing the Server Into the Rack
The following instructions are for replacing the server into a generic rack and might
include steps that are not necessary to install the server into your rack.
Note –
If you are installing the server into the rack for the first time, see the Netra
210 Server Setting Up Guide, 817-2752.
1. Ensure that the top cover is securely in place.
See Section 5.1, “Installing the Top Cover” on page 5-1 .