Sun Microsystems Netra 210, Service Manual

Page: 85 / 122

Chapter 4 Chassis Components 4-13
■
See Section 5.1, “Installing the Top Cover” on page 5-1 .
■
See Section 5.3, “Installing the Server Into the Rack” on page 5-4 .
■
See Section 5.4, “Powering On the Server” on page 5-6 .
■
See Section 5.5, “Verifying the Installation” on page 5-7 .
4.5 Replacing the DVD Assembly
4.5.1 Removing the DVD Assembly
1. Power off the server, remove the server from the rack, open the bezel, and remove
the top cover and airduct.
■
See Section 1.3, “Powering Off the Server” on page 1-3 .
■
See Section 1.4, “Removing the Server From the Rack” on page 1-4 .
■
See Section 1.5, “Opening the Bezel” on page 1-5 .
■
See Section 1.6, “Removing the Top Cover” on page 1-7 .
2. Locate the DVD assembly.
The DVD assembly is located at the left front of the chassis.
3. Remove the DVD module.
See Section 2.3.1, “Removirng the DVD Module” on page 2-7 .
4. Remove the SCC.
See Section 2.4.1, “Removing the SCC” on page 2-10 .
5. Remove the rotary switch cap by pulling it straight off.
See
FIGURE 4-15
.
FIGURE 4-15
Removing the Rotary Switch Cap