SF-8200 Operation Manual
45
/
76
4 QUALITY CONTROL PARAMETERS ENTRY
Select "Batch No." in the reagent interface, pop-up "batch number" management dialog box.
1) Select the quality control in "Product Name" through the drop-down menu;
2) Select the newly added control lot number in the lot number list;
3) Click "QC parameters" button, pop-up "QC parameters" dialog box;
4) Reference Reagent Instruction to set the corresponding "target value" and "SD" value of the "test
item" of the quality control and save it to the left item list;
5) After all required reagent information has been input, click "OK" to return to the "Lot No." manage-
ment dialog box, and click "Save" to finish setting the QC parameters.
5 REAGENT LOADING
5.1 AUTOMATICALLY SAVE AND LOAD REAGENT LAYOUTS
1) The currently used reagent layout will be automatically saved when the program exits normally;
2) When the system is started again, the software will automatically load the last used layout;
Attention! Please make sure that the layout of reagents on the machine is the same as that of
the software display. Otherwise, incorrect test results will be caused.