SF-8200 Operation Manual
11
/
76
④
Alarm for waste solution
⑤
Alarm for cleaning solution
⑥
Inflow socket
⑦
Outflow socket
3 INSTRUMENT SPECIFICATIONS
3.1 INSTRUMENT COMPOSITION
3.1.1. Instrument appearance
Left side view of the instrument
1) Communication interface
USB interface: IC card reader connection port, connected with the PC;
RJ45 network port: instrument communication port, connected with the PC;
2) left maintenance window
Used to check the positioning of manipulator grasping maintenance window, the need to open the tool;
3) Fuse box window
To facilitate the replacement of the instrument's internal circuit board fuse set maintenance window, the
need to open the tool;
4) Power switch and interface
Use the power cord provided by the manufacturer to power the instrument;
|: Turn on the power;
○: Turn off the pow
er;
WARNING: TO PREVENT ELECTRICAL SHOCK, CONNECT THE POWER CORD
WITH POWER OFF.
5) Left front door
Can be opened, used to replace the test cuvette and plate, the specific operation refer to "Chapter II 1.3
Test Cuvette Check";
6) IC card swipe area
For consumables recharge and reagent information entry, the specific operation refer to "Chapter VII 1.2
consumables recharge";
7) front cover
The front cover of the instrument has the function of opening and closing the cover to stop the
machine and the instrument can work normally only when the front cover is closed. At the same time,
closing the bezel minimizes ambient light interference to ensure a good optical test environment.