SF-8200 Operation Manual
44
/
76
4) When adding special items, refer to the reagent manual to set additional reagent parameters;
Such as: PT thrombin, pay attention to the normal average and ISI value items;
Calibrator, please pay attention to set the calibration value of the content.
3 SUPPLIES RECHARGE
1) Recharge method
Recharge equipment test items, and import reagent information. In the "reagent" interface, click
"recharge." In the pop-up "card management" dialog box, you can view the supplies margin.
Click "Start Scanning", and then place the prepaid card in the swipe card area. After the operation
is successful, the buzzer sounds to remind you to complete the recharge.
2) supplies recharge alarm conditions
When the number of consumables is less than 30, the software will pop up a "prepaid card man-
agement" dialog box, prompting the user to recharge.
If there is a shortage of supplies during the test run, the instrument will stop operating after it runs
out of supplies. The "Recharge Card Management" pop-up dialog box pops up and prompts the user to
recharge.
Attention! When scanning the card, please put the prepaid card close to the swipe area.