SF-8200 Operation Manual
13
/
76
3.1.2. Internal components of the instrument
1) manipulator
Used to test the handling of the cuvette, with rotation, can avoid the needles, improve operating
efficiency.
2) Reagent arm
Independent loading arm, used to start the reagent loading, running the reagent zone for the rea-
gent zone start reagent zone and the test position;
Reagent needle has a heating function, draw reagent, the reagent warmed up quickly to meet the
test requirements;
WARNING: Beware of possible heat burns on the surface of the reagent needle. Use
caution.
3) Sample arm
Independent loading arm, for sample and intermediate reagent loading, the operating area for the
reagent reagent in the middle of the reagent zone and temperature;
4) temperature position
20 holes temperature, temperature control and design of insulation to ensure good wet and cold
areas, the effect of temperature.
Warning: Beware of possible high temperature on the surface of the incubation temper-
ature.
5) sample bit
Six pull-out tube rack, each tube rack has 10 sample holes, a total of 60 sample positions.
Built-in sample barcode scanner, you can automatically determine the sample rack into and out, only