SF-8200 Operation Manual
33
/
76
Set the required tests for loading a sample by checking the checkboxes before the item's name,
and select "Select All" under the box to set all tests for all items or "Clear All" to cancel all items
；
G. Common items grouping
Project grouping list, users can quickly select test items, through the bottom of the box "Settings"
button to pop up the dialog box.
1) Add a group
In the dialog box, enter the "group name", select the test box to be set on the left side of the
project, click "Add", the right box to add a new project group
2) Modify the grouping
Select the right side of the box in any of a group, change the left side of the test op tions.
When loading a sample, the "Sample Load" interface will automatically check the test items set
by the default grouping.
3) Delete the group
Select the right side of the box any one group, click "delete" button.
H. Repeat the test
Set the number of times all the selected samples in the sample bar will repeat the test.
This option is a uniform set of options, that is, you cannot set samples with different holes to dif-
ferent numbers of repeated tests.
I.
Use the same settings
If you check the "Use the same settings" option, all the selected samples in the sample bar will
have the same set of test items.
If you do not check this option, you need to click on the "sample number" for each hole samples
were set test items.
J. The sample number automatically increases
Check "Sample Number Auto Increase", the system will automatically assign the sample numbers
in sequence; if this option is not checked, the sample numbers will not change.
After setting all the options, click "OK" to add the test sample successfully.