SF-8200 Operation Manual
30
/
76
2) The sample bit can automatically recognize the sample strip insertion process. When the sample strip
is fully pushed into the sample position, the software automatically pops up the "Sample Load" dialog
box, and the front window indicator of the instrument turns to "green";
When the sample tube has been pasted bar code, as shown on the left, sample 1, 2, sample
number is filled with bar code information, you can set the emergency priority test.
When the sample tube is not pasted bar code, as shown on the left, sample number 5,6, sample
number "red" shading display, marking did not identify the bar code, but the test tube occupy the hole.
To set a sample, enable the sample number, fill in the sample information or code by ticking the
checkbox, as shown to the right.
3) Confirm the sample information is correct, set the test items, click "OK", the sample bar is locked, the
instrument front window indicator from "green" to "red", load the sample completed.
4) When all the tests in the sample strip are completed, the front window indicator will change from "red"
to "green" and the sample strip will be drawn out to complete unloading. At this time, the front window
indicator will be off;
For more sample operation details, please refer to "Chapter 3 Sample Management"
Attention! When the instrument pause / stop the test and all the test items in the software
queue are completed, the sample strips can be unloaded manually via the "Uninstall" button
in the "Sample" interface.