Sturtevant Richmont Global 400mp, User Manual

Page: 46 / 73

Global 400mp User Manual 46 of 72 v4.0
Chapter 4: 17 August 2016
Example:
*%02%19%*
This bar code would set the Channel ID of the unit to 19.
3. Controller Name
This command sets the Controller Name of the unit.
Data: up to 25 characters
Example:
*%03%air - bag%*
This bar code would set the Controller name of the unit to “air - bag”.
4. VIN
This command sets the VIN or Identifier part 1 (VIN characters 1-25) reported by the unit in
tightening result messages, the ACOP MID 0052 Vehicle ID Number, and the ACOP MID 0152
Multiple identifier and result parts notifications.
Data: up to 25 characters
Example:
*%04%VIN1234567%*
As mentioned above, a bar code is assumed to be a VIN number if the data is not in the
command format. As such, the same VIN could be provided as:
*VIN1234567*
5. Start Job
This command instructs the unit to select a job. Any other running parameter or job will be
stopped before starting the new job.
Data: number of up to 3 digits specifying the job number to run (1-100)
Example:
*%05%32%*
This bar code would instruct the unit to start job number 32.
6. Identifier part 2
This command sets the Identifier part 2 (VIN characters 26-50) reported by the unit in tightening
result messages and the ACOP MID 0152 Multiple identifier and result parts notifications.
Data: up to 25 characters
Example:
*%06%B23FJ9S3%*