Sturtevant Richmont Global 400mp, User Manual

Page: 23 / 73

Global 400mp User Manual 23 of 72 v4.0
Chapter 3: Configuring the unit 17 August 2016
Key New name
8
T
6
TM
6
TN
6
TO
right arrow
TO_
6
TOM
6
TON
6
TOO
5
TOOJ
5
TOOK
5
TOOL
right arrow
TOOL_
right arrow
TOOL _
1
TOOL 1
(Since neither 1 nor 0 have associated letters, pressing them will only enter the number.)
Once you have entered the desired name, press
Save . This does not permanently save the value
just entered. You must also save from the screen that sent you to the letter screen. If you no
longer want to change the value, press
Cancel . At this point, the unit will return to the previous
screen without changing the value.
Main Menu
Figure 10: Main menu
The Global 400mp menu provides the entry point to configure and control the unit. You must
enter the box password before entering the menu from the Run screen. If you cannot remember
the password, you may reset it to the factory default (0104) by entering the sequence “6853.48”
on the Run screen. Use the arrow keys to navigate to the desired entry and press ENT to go to
the entry’s screen. To exit the menu, press ESC or navigate to
LOCK & RETURN or
RETURN and press ENT. Pressing ESC or LOCK & RETURN will “lock” the menu and
return to the Run screen, requiring the password to be reentered before the menu can be accessed
again. Pressing
RETURN will return to the Run screen without locking the unit, allowing the
menu to be reentered without entering the password.