Sturtevant Richmont Global 400mp, User Manual

Page: 37 / 73

Global 400mp User Manual 37 of 72 v4.0
Chapter 3: Configuring the unit 17 August 2016
password, select the password field and press ENT, which will take you to the Enter new
Password screen. If there is no password, this field will be blank.
XBEE Channel
Default: 1
Range: 1 to 12
This setting controls which channel is used by the Global 400mp radio. All tools learned to the
Global 400mp will be set to this channel automatically as part of the learn process. In general,
this setting does not have to be changed, but if tool communication is not working reliably,
changing this setting may improve communication. When a change to this setting is saved, the
unit will go to the Channel Change screen to guide you through updating all learned tools to use
the new channel.
The radio frequencies used by each channel can be found in
Chapter 10: Product Specifications .
Beep on reject?
Default: yes
This setting determines if the Global 400mp will sound the beeper when a rejected tightening is
received. The reject sound is one long beep.
Beep on batch?
Default: yes
This setting determines if the Global 400mp will sound the beeper when a batch is completed.
The batch sound is four short beeps. When running a job, the beep controlled by this setting may
be for each parameter batch or for the complete job. See the Jobs sections for more information
about those settings.
Beep on cycle?
Default: yes
This setting determines if the Global 400mp will sound the beeper when an accepted tightening
is received that would not trigger the batch sound. The cycle sound is two short beeps.
Volume
Default: 3
Range: 0 to 10
This setting controls the volume of the beeper. When set to 0, the beeper will not sound at all,
regardless of the other
Beep on X settings. A setting of 3 or below is recommended while using
the Global 400mp in an office or other environment without much background noise.
Reject timeout
Default: 1
Range: 0 to 10 seconds