Sturtevant Richmont Global 400mp, User Manual, Page: 17 / 73

Global 400mp User Manual 17 of 72 v4.0
Chapter 1: Overview 17 August 2016
Unit Status
Figure 3: Unit Status screen
Function keys
1. GRAPH –Goes to the Rundown Graph screen to show the rundown graph for an air tool
active in an interface.
2. NETWORK – Go to the Network Status screen.
3. TOOL – Go to the Tool Status screen.
4. I/O – Go to the I/O State screen
The Unit Status screen shows some basic information about the current unit configuration that
may be useful for diagnostics purposes. Press ESC to return to the Run Screen
The average signal strength is for all tools learned to the unit and should be from 0 to -70 dBm.
If the signal strength is greater than -70 dBm, the unit may have frequent slow or failed
communication. To improve the signal strength, try bringing the unit and tools closer together,
changing the XBEE channel, or reducing sources of interference from the environment.
Last barcode shows the command number of the last barcode scanned (see Chapter 4: Serial
communications ) or an error if the last attempt barcode could not be processed. Interface 1-4
VIN show what VIN will be included with tightenings for each interface.
Rundown Graph
Figure 4: Select Interface screen Figure 5: Rundown Graph screen
Function keys
1. EDIT – Go to the Parameter Edit screen for the running parameter. This will require the
password to be entered.